Tile Calculator

Area
m
m
Tiles
cm
cm
mm
Enter 0 for no gap.
%
10% is common; 15% or more for diagonal layouts.
Boxes and cost
Any currency.
Construction Updated 29 Oct 2026

Works out how many tiles you need to cover a floor, wall, splashback or shower, and how many boxes to buy. Enter the length and width of the area (or its total area), the size of one tile and the width of the grout gap, and add a waste allowance for cuts and breakages. The calculator counts the tiles, rounds up to whole boxes and, with a price per box, estimates the cost. Works in metric (metres, centimetres, millimetres) or imperial (feet and inches).

  • The area is flat and rectangular, or its total area is known.
  • All tiles are the same size and laid in a grid.
  • Grout, adhesive and trim are not included.

Formula

Tiles = ⌈ area ÷ ((l + g) × (w + g)) × (1 + waste%) ⌉; boxes = ⌈ tiles ÷ tiles per box ⌉
  • Each tile plus its share of the grout covers (l + g) × (w + g).
  • Metric: tile sizes in cm are divided by 100 and gaps in mm by 1,000 to give metres. Imperial: (l + g)(w + g) in square inches is divided by 144 to give square feet.
  • Tiles and boxes are rounded up to whole numbers; the cost uses whole boxes.
  • The count assumes cut pieces are not reused; the waste allowance covers cuts at the edges and breakages.

4 m × 3 m floor, 30 × 30 cm tiles, 3 mm gap, 10% waste

Inputs
  • Units: metric
  • Area to tile: rectangle
  • Length (L): 4
  • Width (W): 3
  • Total area: 12
  • Tile length (l): 30
  • Tile width (w): 30
  • Grout gap (g): 3
  • Waste allowance: 10 %
  • Tiles per box: 10
  • Price per box (optional): 25

Area = 12 m². Each tile covers 0.303 × 0.303 = 0.091809 m², so 12 ÷ 0.091809 = 130.7 tiles. Adding 10%: 143.78, rounded up to 144 tiles, which is 15 boxes of 10 (cost 15 × 25 = 375).

Sources & references

Frequently asked questions

How do I calculate how many tiles I need?
Divide the area by the area of one tile (plus grout gap), then add 10% for waste and round up. A 2 m × 1.5 m splashback with 20 × 10 cm tiles and no gap needs 3 ÷ 0.02 = 150 tiles, or 165 with 10% extra.
How much extra tile should I buy?
About 10% for a straight layout in a simple room, 15% or more for diagonal or herringbone patterns, small rooms with many cuts, or large-format tiles. Keeping a few spare tiles from the same batch also helps with future repairs.
Does the grout gap matter?
A little. Wider gaps mean each tile covers slightly more area, so you need fewer tiles. With 30 cm tiles, a 3 mm gap saves about 2% of the tiles compared with no gap.
How many tiles are in a square metre?
It depends on the size: about 11 tiles of 30 × 30 cm, 6.25 of 40 × 40 cm, and 4 of 50 × 50 cm, before the grout gap and waste.

Related calculators

Flooring Calculator Calculates how much flooring to buy for a room. Choose feet or metres, enter the room length and width (or the floor area if the room is not a rectangle), the waste allowance for cuts and the coverage of one box of flooring. You get the floor area, the area to purchase including waste, the number of whole boxes, the coverage you will actually receive and, if you enter a price, the cost of the boxes. Square Footage Calculator Calculates the square footage of a room, floor, lot or any surface from its measurements. Choose a rectangle, an L-shaped room split into two rectangles, a circle or a triangle, and enter the dimensions in feet, inches, yards, metres or centimetres. The area is given in square feet, square metres, square yards and acres, multiplied by the number of identical areas if you have several. Add a price per square foot, square metre or square yard to estimate the cost of flooring, carpet, paint or other materials. Area Calculator Finds the area of 2D shapes: rectangle, square, triangle (from base and height, three sides, two sides and the angle between them, or two angles and the side between them), circle, semicircle, circular sector, ellipse, trapezoid, parallelogram (three ways), rhombus (three ways), kite (two ways), regular pentagon, hexagon and octagon, annulus (ring), any quadrilateral from its diagonals and any regular polygon. Pick the shape, enter its dimensions in any length unit (angles in degrees or radians), and you get the area in that unit squared, plus square metres and square feet, and the perimeter where the inputs fix it. Handy for working out the area of a room, a garden bed or a patio before buying flooring, mulch or bricks.