Percentage Increase Calculator
Works out how much a value has grown or shrunk in percentage terms. Give the starting and ending values to get the percentage increase (or decrease) and the difference between them, or work backwards: find the new value after a given percentage rise or fall, find the original value before a change, or recover both values from the percentage and the size of the change. Results show the change both as an increase and as the equivalent decrease, so a fall of 10% reads as an increase of −10%.
- Percentages are relative to the initial value, not to the final value or the average of the two.
- When only the final value, or only the percentage and difference, are known, the initial value is assumed positive where possible.
Formula
Percentage change = (final − initial) ÷ |initial| × 100%; final = initial + p × |initial|; for a positive initial value, initial = final ÷ (1 + p)
- p is the change as a fraction: a 15% increase is p = 0.15 and a 15% decrease is p = −0.15.
- The change is measured against the size of the initial value |initial|, so a rise from −50 to −40 counts as a 20% increase.
- Working backwards from the final value assumes a positive initial value when one fits, which covers almost every real case. A negative initial value is used only when no positive one works.
- From the percentage and the difference alone, the initial value is difference ÷ p and is taken to be positive.
- The sentence under the results rounds each number to 5 significant figures; the rows above keep up to 6 decimal places (4 for percentages).
Price rise from 1,250 to 1,445
Inputs
- What do you know?: find-percent
- Initial value: 1250
- Final value: 1445
The difference is 1,445 − 1,250 = 195. Divide by the starting value: 195 ÷ 1,250 = 0.156, which is a 15.6% increase.
Sources & references
Frequently asked questions
How do I calculate a percentage increase?
Subtract the old value from the new one, divide the result by the old value and multiply by 100. Going from 80 to 100 gives (100 − 80) ÷ 80 × 100 = 25%.
Why is a 50% rise followed by a 50% fall not back to the start?
Each percentage is taken from a different base. 100 rises by 50% to 150, but a 50% fall from 150 removes 75 and leaves 75. To undo a rise of p you need a fall of p ÷ (1 + p): 33.3% in this case.
How do I find the original value before a percentage increase?
Divide the final value by 1 plus the increase as a decimal. If a price is 120 after a 20% rise, the original was 120 ÷ 1.2 = 100. For a decrease, divide by 1 minus the decrease: 90 after a 10% cut was 90 ÷ 0.9 = 100.
Can the percentage increase be more than 100%?
Yes. A value that more than doubles has risen by more than 100%; going from 1 to 51 is a 5,000% increase. A decrease, on the other hand, cannot go past 100% unless the value turns negative.
Why can't the initial value be zero?
The change is divided by the starting value. Dividing by zero has no answer, so any change away from zero would be an infinitely large percentage.
Related calculators
Average Calculator Finds the average (arithmetic mean) of a list of numbers, together with the count, sum, median, geometric mean, smallest and largest value and the range. Paste or type the numbers separated by commas, spaces or semicolons, in any mix. Anything that is not a number is skipped and listed, so you can see exactly which values went into the result. Useful for test scores, prices, measurements or any other set of data. Pythagorean Theorem Calculator Solves a right triangle with the Pythagorean theorem, a² + b² = c². Give any two of the two legs, the hypotenuse, the area and the perimeter, and it finds the missing sides, then adds the area, perimeter, both acute angles and the height dropped onto the hypotenuse. Lengths can be in metric or imperial units, from millimetres to nautical miles, and the area in anything from square millimetres to acres. Handy for checking that a corner is square, sizing a ladder or ramp, or finding a diagonal. Quadratic Formula Calculator Solves any quadratic equation with the quadratic formula, x = (−b ± √(b² − 4ac)) ÷ 2a. Enter the equation in standard, vertex or factored form and get both roots as decimals and in exact simplified radical form, the discriminant and what it says about the roots, the vertex, the axis of symmetry, the y-intercept and the equation rewritten in all three forms. Switch on complex roots to solve equations with a negative discriminant, and show the working step by step.