Bar to PSI Converter

bar
Enter the pressure you want to convert. Gauge readings below atmospheric (vacuum) may be negative.
Other Updated 5 Nov 2026

Converts pressure between bar and pounds per square inch (psi) in either direction, using the exact definitions behind both units: 1 bar is 100,000 pascals and 1 psi is one pound-force on a square inch, 6,894.757 Pa. Enter a tyre, compressor, hydraulic or scuba-tank pressure, pick the units, and you get the converted value, the factor both ways, the same pressure in kPa and atmospheres, and a quick bar-to-psi and psi-to-bar reference table. Other common pressure units such as kPa, MPa, ksi, atm, kgf/cm² and mmHg are also available.

  • Psi uses the avoirdupois pound-force with standard gravity (9.80665 m/s²), as defined by NIST.
  • Millimetres and inches of mercury are the conventional units (mercury at 0 °C under standard gravity).
  • The converter does not add or remove atmospheric pressure; gauge stays gauge and absolute stays absolute.

Formula

psi = bar × 14.5037738; bar = psi ÷ 14.5037738 (= psi × 0.0689475729)
  • 1 bar is defined as exactly 100,000 Pa (100 kPa). 1 psi is one pound-force per square inch: 0.45359237 kg × 9.80665 m/s² ÷ (0.0254 m)² = 6,894.757293 Pa, so 1 bar = 100,000 ÷ 6,894.757293 = 14.50377377 psi.
  • Every unit is converted through pascals, so any pair works: the value is multiplied by the pascals in one source unit and divided by the pascals in one target unit.
  • Other definitions used: 1 atm = 101,325 Pa, 1 kgf/cm² = 98,066.5 Pa, 1 ksi = 1,000 psi, 1 mmHg (conventional) = 133.322387 Pa, 1 inHg = 25.4 mmHg = 3,386.389 Pa.
  • The conversion is the same for gauge and absolute pressure: barg converts to psig and bara to psia. Do not mix them; absolute = gauge + local atmospheric pressure (about 1.013 bar or 14.696 psi at sea level).
  • Display precision: results of 1 or more are rounded to 4 decimal places with trailing zeros dropped; values within floating-point noise of a 15-significant-digit number are snapped to it first; results below 1 keep 6 significant figures; results of 10¹⁵ or more, or below 10⁻⁶, use scientific notation with 6 significant figures. Factor rows show up to 10 significant figures.

32.5 bar to psi

Inputs
  • Pressure: 32.5
  • From: bar
  • To: psi

1 bar = 100,000 Pa and 1 psi = 6,894.757293 Pa, so the factor is 100,000 ÷ 6,894.757293 = 14.50377377. 32.5 × 14.50377377 = 471.3726 psi. The same pressure is 3,250 kPa or 32.075 atm. Going back, 471.3726 psi × 0.0689475729 = 32.5 bar.

Sources & references

  • NIST Guide to the SI, Appendix B.8: Factors for Units Listed Alphabetically
    National Institute of Standards and Technology · Retrieved 5 Nov 2026

    bar = 1.0 × 10⁵ Pa exactly; pound-force per square inch (psi) = 6.894757 × 10³ Pa; atmosphere, standard = 1.01325 × 10⁵ Pa; kilogram-force per square centimetre = 9.80665 × 10⁴ Pa; millimetre of mercury, conventional = 1.333224 × 10² Pa.

Frequently asked questions

How many psi is 1 bar?
1 bar is 14.5038 psi (14.5037738 to nine figures). For a quick estimate, multiply bar by 14.5: a tyre at 2.2 bar is about 31.9 psi.
How do I convert psi to bar?
Divide psi by 14.5037738, or multiply by 0.0689476. For example, 232 psi ÷ 14.5037738 = 15.9958 bar, and a 3,000 psi scuba cylinder is about 206.84 bar.
What is 45 bar in psi?
45 × 14.5037738 = 652.67 psi (652.6698 to four decimals).
Does it matter if the gauge reads barg or bara?
Not for the conversion itself: barg converts to psig and bara to psia with the same factor. A tyre gauge showing 2.2 bar reads gauge pressure, so it is 31.9 psig; the absolute pressure inside is about 3.21 bar or 46.6 psia at sea level.
Is a bar the same as an atmosphere?
Close but not equal. 1 standard atmosphere is 101,325 Pa = 1.01325 bar = 14.6959 psi, while 1 bar is 100,000 Pa = 0.98692 atm.

Related calculators