Dog BMI Calculator (Canine Body Mass Index by Breed)

If your dog's breed isn't listed, choose "Other / mixed breed" at the top of the list.
Measurements
in
Measured standing, from the floor to the top of the shoulder blades (withers). Must be under 110 cm (43.3 in).
lb
Biology Updated 5 Nov 2026

Works out a simple canine body mass index from your dog's shoulder height and weight, then compares it with the healthy range for its breed. The index is weight in pounds divided by height at the withers in inches, with breed ranges for 160 breeds derived from American Kennel Club height and weight standards. Mixed-breed dogs are checked against the general guide of 3 or less. You also see the weight band that would put a dog of this height inside its breed range, as a starting point for a conversation with your vet.

  • This is an estimate, not veterinary advice. Whether a dog is underweight, overweight or obese, and any change of diet or exercise, should be decided with a veterinarian.
  • The dog is an adult; puppies, pregnant or lactating bitches and dogs with fluid retention or heavy muscling will not fit breed ranges.
  • Height is measured at the withers (top of the shoulder blades) with the dog standing on a level surface.
  • Breed ranges are taken as published in the reference dataset and were not re-derived from each AKC standard; some ranges (for example the American Pitbull Terrier at 0.76–1.34) look unusually low for the breed.

Formula

Dog BMI = weight (lb) ÷ height at the shoulder (in). A metric weight is turned into pounds by dividing kilograms by 0.45 and centimetres into inches by dividing by 2.54, so BMI = (kg ÷ 0.45) ÷ (cm ÷ 2.54). The weight that matches a BMI at a given height is BMI × height (in) × 0.45 kg.
  • Unlike the human BMI, this canine index divides by height once, not by height squared, so the numbers are small (about 0.4 for toy breeds to 9 for the largest mastiffs) and only make sense within a breed.
  • This calculator converts kilograms to pounds by dividing by 0.45 rather than the exact 0.45359237. A weight entered in pounds is first converted to kilograms exactly and then divided by 0.45, so both units give the same result; the BMI is therefore about 0.8% higher than a strict pound-per-inch ratio.
  • A dog is reported as underweight when its BMI (rounded to 0.01) is below the breed's lower limit, overweight when it is above the upper limit, and healthy otherwise. For Other / mixed breeds the only available guide is a BMI of 3 or less, which may not suit large dogs.
  • Breed ranges come from a reference dataset derived from AKC height and weight standards for adult males and females. The Akita range was stored in reverse order (5.46 to 2.52) in the source dataset and is used here as 2.52–5.46.
  • Heights of 110 cm (about 43.3 in) or more are rejected.

A 20.9-inch, 40 lb Samoyed

Inputs
  • Breed: samoyed
  • Height unit: in
  • Weight unit: lb
  • Height at the shoulder: 20.9
  • Weight: 40

40 lb = 18.1437 kg, and 18.1437 ÷ 0.45 = 40.319 (the pound conversion used here). Dividing by the 20.9 in height gives a BMI of 40.319 ÷ 20.9 = 1.93. The Samoyed range is 1.68–3.12, so the weight is healthy. At 20.9 in, that range corresponds to 1.68 × 20.9 × 0.45 = 15.80 kg (34.8 lb) up to 3.12 × 20.9 × 0.45 = 29.34 kg (64.7 lb). A Boxer of the same size would be underweight, because its range starts at 2.62.

Sources & references

  • Adaptação do índice de massa corporal humano para cães (Adaptation of human body mass index for dogs), Ciência Rural 38(4): 1038–1043, 2008
    Ciência Rural, Universidade Federal de Santa Maria (Muller DCM, Schossler JE, Pinheiro M) · Retrieved 5 Nov 2026

    Peer-reviewed canine BMI study: 246 dogs scored with Laflamme's (1997) 9-point body condition scale; index = weight (kg) / stature² where stature runs from the atlanto-occipital joint along the back to the ground behind the hind legs; 11.8–15 kg/m² ideal for medium dogs (10–25 kg). Different measurement and scale from the index used here; cited for the BMI concept and its limits, not for the breed ranges.

  • Samoyed – breed height and weight
    American Kennel Club · Retrieved 5 Nov 2026

    Example of the AKC standards the breed ranges are based on: males 21–23.5 in and 45–65 lb, females 19–21 in and 35–50 lb. 35 lb ÷ 21 in = 1.67 and 65 lb ÷ 21 in = 3.10, close to the Samoyed range of 1.68–3.12 used here, but the exact derivation is not published.

  • Body Condition Score (dog)
    World Small Animal Veterinary Association (WSAVA) Global Nutrition Committee · Retrieved 15 Nov 2026

    9-point body condition chart for dogs with scores 4 and 5 marked IDEAL (ribs palpable without excess fat, waist visible from above, abdominal tuck); references Laflamme DP, Canine Pract 1997;22:10-15.

Frequently asked questions

How do I calculate my dog's BMI?
Weigh your dog and measure its height from the floor to the top of the shoulders while it stands squarely. Convert the weight to pounds (this calculator divides kilograms by 0.45) and the height to inches (divide centimetres by 2.54), then divide weight by height. For example, a 40 lb dog that is 20.9 in tall has a BMI of about 1.93.
What is a healthy BMI for a dog?
It depends on the breed, because a lean Greyhound and a lean Bulldog carry very different weight for their height. This calculator compares your dog with a breed-specific range, such as 1.68–3.12 for a Samoyed or 2.62–3.51 for a Boxer. For mixed or unlisted breeds this calculator uses a BMI of 3 or less as a rough guide (no published standard backs this cut-off), although big, heavy-boned dogs can be healthy above it.
Is the dog BMI as reliable as a body condition score?
No. The ratio cannot tell muscle from fat and the breed ranges come from show standards, not from body fat measurements. Vets usually assess dogs with a 9-point body condition score (Laflamme, 1997; used in the WSAVA chart), where 4–5 is ideal, by feeling the ribs and looking at the waist. Use the BMI as a quick screen and confirm the result with a body condition check by your vet.
Is there a scientifically validated canine BMI?
A 2008 study of 246 dogs in Brazil (Muller, Schossler and Pinheiro) proposed a canine BMI of weight in kg divided by the square of a body length measured from the base of the skull, along the back and down the hind leg. It found 11.8–15 kg/m² to be ideal for medium-sized dogs. That index uses a different measurement and scale, so its values cannot be compared with the shoulder-height BMI calculated here.

Related calculators

Cat BMI Calculator (Feline Body Mass Index) Estimates how much of your cat's body is fat from two tape-measure readings, using the Feline Body Mass Index (FBMI) developed at the Waltham Centre for Pet Nutrition. Measure the rib cage circumference at the 9th rib and the lower hind leg from the middle of the kneecap to the point of the heel (the leg index measurement, LIM). The result is an estimated body fat percentage, sorted into underweight, normal, overweight or obese. You can also work backwards to find the rib cage size that matches a target FBMI, which is handy for tracking a weight-loss plan agreed with your vet. Dog Food Calculator Works out how much food to put in your dog's bowl each day. Pick the dog's life stage or activity (puppy, neutered or intact adult, weight loss or gain, light to heavy work, senior) and enter its weight; the calculator finds the resting energy requirement, RER = 70 × weight^0.75, and multiplies it by the matching factor to get the daily calories. Then type the calorie content printed on the food bag, per cup, per kilogram, per 100 g, per pound or per serving, and it converts the calories into cups, grams or ounces per day and per meal. BMI Calculator Work out your body mass index (BMI) from your height and weight in metric or imperial units (cm, m, feet and inches, inches, kg, pounds, stones). The result shows the WHO adult weight category, BMI Prime, the ponderal index, the healthy weight range for your height and how much weight you would need to gain or lose to reach it. Add your age and sex to see where your BMI sits among US adults of the same age and sex.