Concrete Slab Calculator
Calculates the volume of concrete for rectangular slabs, footings and walls or for round columns and post holes. Choose imperial (feet and inches, result in cubic yards) or metric (metres and centimetres, result in cubic metres), enter the dimensions and how many identical pours you need, and add a waste allowance. If you use pre-mixed bags, enter the concrete density and bag weight to get the total weight, the number of bags and their cost.
- Slabs are rectangular and columns are circular cylinders, each with uniform dimensions.
- The result is the volume of concrete only, with no allowance for reinforcement, footings or edge thickening unless you include them in the waste figure.
- The bag count uses the density you enter; the real yield of a bag mix can differ, so check the bag.
- Prices are entered by you; no currency conversion is applied.
Formula
Slab: volume = length × width × thickness. Round: volume = π × (diameter ÷ 2)² × height. Order = volume × quantity × (1 + waste ÷ 100). Bags = ⌈ order volume × density ÷ bag weight ⌉
- Imperial: thickness and diameter are in inches and divided by 12 to give feet; cubic feet are divided by 27 to give cubic yards (1 yd³ = 27 ft³).
- Metric: thickness and diameter are in centimetres and divided by 100 to give metres.
- Weight = volume to order × density. The bag count is that weight divided by the bag weight, rounded up, following the bag's stated yield by weight.
- 1 cubic yard = 0.7645549 m³ and 1 foot = 0.3048 m exactly, so the two unit systems agree.
10 ft × 10 ft slab, 4 in thick, 60 lb bags
Inputs
- Units: imperial
- Shape: slab
- Length: 10
- Width: 10
- Thickness: 4
- Quantity: 1
- Waste allowance: 10 %
- Concrete density: 150
- Bag weight: 60
- Price per bag: 6.5
Volume = 10 × 10 × (4 ÷ 12) = 33.33 ft³, which is 1.23 yd³. A 10% waste allowance gives 36.67 ft³ (1.36 yd³) to order. At 150 lb/ft³ that weighs 5,500 lb, which is 91.7, so 92 bags of 60 lb, costing 598.00 at 6.50 a bag.
Sources & references
Frequently asked questions
How thick should a concrete slab be?
It depends on the load and soil. Many residential patios and paths are around 4 inches (100 mm), while driveways and garage floors are often thicker. Follow local building rules or ask your engineer or supplier.
How much waste allowance should I add?
The default of 10% is a common rule of thumb for spillage, uneven sub-base and over-excavation. Use a lower figure for a very flat, well-formed base and a higher one when the ground is rough.
How many cubic feet are in a cubic yard?
One cubic yard is 27 cubic feet, because 3 ft × 3 ft × 3 ft = 27 ft³.
Does this include rebar, gravel or formwork?
No. The result is only the concrete volume of the slab. Reinforcement, sub-base and formwork are separate quantities.
Can I use it for a round slab or post hole?
Yes. Choose 'Round column or post hole' and enter the diameter and the height or depth. For other shapes, find the area with the area calculator and multiply by the thickness.
How many bags of concrete make a cubic yard?
It depends on the bag's yield. Using a density of 150 lb/ft³, one cubic yard weighs about 4,050 lb, which is about 68 bags of 60 lb or 51 bags of 80 lb. Bag mixes are often a little lighter, so check the yield printed on the bag.
Related calculators
Area Calculator Finds the area of 2D shapes: rectangle, square, triangle (from base and height, three sides, two sides and the angle between them, or two angles and the side between them), circle, semicircle, circular sector, ellipse, trapezoid, parallelogram (three ways), rhombus (three ways), kite (two ways), regular pentagon, hexagon and octagon, annulus (ring), any quadrilateral from its diagonals and any regular polygon. Pick the shape, enter its dimensions in any length unit (angles in degrees or radians), and you get the area in that unit squared, plus square metres and square feet, and the perimeter where the inputs fix it. Handy for working out the area of a room, a garden bed or a patio before buying flooring, mulch or bricks. Brick Calculator Estimates how many bricks you need for a wall. Work in metric (metres and millimetres) or imperial (feet and inches), enter the wall length and height or its area, deduct doors and windows, and give the brick size, mortar joint and wall thickness (half-brick or one-brick). The calculator returns the net wall area, bricks per unit area, the bricks required, the quantity to order with a waste allowance, the wet volume of mortar and, optionally, the cost of the bricks. Mulch Calculator Calculates how much mulch you need to cover a garden bed. Choose imperial (feet and inches, result in cubic yards) or metric (metres and centimetres, result in cubic metres), describe the bed as a rectangle, a circle or a known area, and enter the depth of the layer. You get the volume of mulch, the number of whole bags, and optionally the cost and weight of the bags or the cost of bulk delivery.