BSA Dosage Calculator

Patient
kg
cm
Dose
The dose per square metre from the protocol or prescription.
%
100% is the full dose; enter e.g. 75 for a prescribed 25% dose reduction.
Only apply a cap when the protocol or prescriber specifies one.
Health Updated 14 Nov 2026

Works out a body-surface-area-based dose: the prescribed amount per square metre (mg/m², mcg/m², g/m² or units/m²) multiplied by the patient's BSA. Enter height and weight in metric or imperial units and pick the BSA formula (Mosteller by default, or Du Bois, Haycock, Gehan & George, Fujimoto), or type in a BSA already measured. You can apply a dose level such as 75% for a dose reduction, and an optional cap on the BSA (for example 2.0 m²) or on the total dose (for example 2 mg). The result shows the BSA used, the total dose, the dose every formula would give and a clear flag when a cap was applied. It is a checking aid for clinicians, pharmacists and students, not a prescription.

  • This is not medical advice. Every dose must be prescribed by a qualified clinician and independently checked by a pharmacist or second clinician according to local policy before it is given.
  • Use the current measured height and actual body weight; a wrong weight or height unit is a common source of dosing error.
  • BSA formulas are population estimates and are less accurate in infants, very small or very large patients, amputees and people with major fluid shifts.
  • The calculator does not know drug-specific maximums, renal or hepatic adjustments, previous toxicity or the rounding rules of your institution (for example rounding to vial sizes).
  • Doses are shown to at most 2 decimal places and are not rounded to measurable volumes or tablet strengths.

Formula

Dose = dose per m² × BSA (m²) × dose level %; Mosteller BSA = √(H cm × W kg ÷ 3600); Du Bois BSA = 0.007184 × W^0.425 × H^0.725
  • The BSA is rounded to 2 decimal places before it is multiplied by the dose per m², so the dose equals the BSA shown × the dose per m².
  • Other formulas: Haycock 0.024265 × W^0.5378 × H^0.3964; Gehan & George 0.0235 × W^0.51456 × H^0.42246; Fujimoto 0.008883 × W^0.444 × H^0.663 (W in kg, H in cm).
  • Imperial inputs are converted with 1 lb = 0.45359237 kg and 1 in = 2.54 cm. The shortcut Mosteller formula in inches and pounds, √(in × lb ÷ 3131), is approximate and can differ by 0.01 m².
  • A BSA cap replaces the BSA with the maximum when the calculated BSA is higher; a dose cap replaces the total dose with the maximum when it is higher. Without a cap the full calculated dose is shown.
  • ASCO guidelines recommend full, weight-based doses using actual body weight for obese adults, rather than routinely capping BSA at 2.0 m²; caps belong to specific drugs or protocols.

75 mg/m² for a patient of 60 kg and 170 cm

Inputs
  • Body surface area: measure
  • Units: metric
  • Weight: 60
  • Height: 170 cm
  • Height: feet: 5 ft
  • Height: inches: 7 in
  • BSA formula: mosteller
  • Body surface area: 1.7 m²
  • Prescribed dose per m²: 75
  • Dose unit: mg
  • Dose level: 100 %
  • Cap: none
  • Maximum BSA: 2 m²
  • Maximum total dose (same unit as the dose): 2

Mosteller BSA = √(170 × 60 ÷ 3600) = √2.8333 = 1.683, rounded to 1.68 m². Dose = 75 mg/m² × 1.68 m² = 126 mg. With the Du Bois formula the BSA is 0.007184 × 60^0.425 × 170^0.725 = 1.69 m², giving 126.75 mg.

Sources & references

Frequently asked questions

How do you calculate a dose from mg/m²?
Work out the body surface area in square metres, then multiply it by the dose per square metre. For 75 mg/m² and a BSA of 1.68 m², the dose is 75 × 1.68 = 126 mg. A dose reduction to 80% would give 126 × 0.8 = 100.8 mg.
Should the BSA be capped at 2.0 m²?
Not routinely. The ASCO guideline on dosing obese adults with cancer recommends full doses based on actual body weight, and found no evidence that full doses increase toxicity in obese patients. Some individual drugs have their own maximums (vincristine is often capped at 2 mg per dose), so use a cap only when the protocol says so.
Mosteller or Du Bois: which formula should I use?
Use the formula your institution or protocol specifies. Mosteller is the simplest and most widely used for dosing; Du Bois is the original 1916 formula. For a 60 kg, 170 cm adult they give 1.68 m² and 1.69 m², so the dose differs by under 1%. The comparison table shows the dose every formula would give.
What if the BSA has already been measured or calculated?
Choose 'Enter BSA directly' and type the value in m². The dose is then simply that BSA × the dose per m² × the dose level, with any cap applied.

Related calculators